Click to enlarge
Plastic Master®
Back to products
End Cutter EC 3 NL

Micro Fog®

Categories: ,

Description

PRODUCT SUMMARY

Eastman’s exclusive Micro Fog machine ensures maximum heat reduction for cutting highly fusible materials and plastics. The Micro Fog device sends a mist of coolant / lubricant, assisted by 90-120 psi compressed air, behind the knife and out through a specially slotted wave-edged blade. This allows coolant to penetrate every layer, eliminating the conditions that cause fusing. The Micro Fog is ideal for cutting Cordura® , PVC plastic or polyester, and vinyl.

The Micro Fog™ is available in a standard version, 629XMF, and a heavy-duty version, 627XMF.

All Eastman machines are built with the highest grade materials available.

FEATURES

  • Ensures maximum heat reduction to eliminate fusing of materials aided by its dual speed motor, short stroke and wave blade
  • The Micro Fog device sends a pressure fed mist of coolant / lubricant behind the knife and out through a specially slotted knife-slide to evenly cool the entire blade
  • Requires 90-120 psi (6.2-8.3 bars) compressed air

ADDITIONAL INFORMATION

Motors 110V, 1ph, 50/60Hz 220V, 1ph or 3ph, 50/60Hz 380V, 3ph, 50Hz Standard: Single Speed Optional: Dual Speed
Horsepower .65hp, 1ph .93hp, 3ph
Weight 34 lbs. (15.4kg)
Pneumatic 90-120 psi (6.2-8.3 bars)
Blades Wave Groove
Belts Standard: Medium Grit Optional: Fine, Coarse, Rough
Options Micro Fog only available for 6 in. and 8 in.
Stroke Sizes 1.125 in. (2.86cm) 1.25 in. (3.18cm) 1.5 in. (3.81cm) 1.75 in. (4.45cm)
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Micro Fog®”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Related products

Band Knives EC 900 N

Features 1.Variable speed provided by unique inverter control adapts cutting to every type of material. Speed can easily be changed by touch panel. 2.Digital read-out of knife speed, easily adjustable to suit various cutting requirements. 3.Touch panel with digital display is built into work-table for maximum ease of operation. 4.Very low vibration and noise levels achieved by compact, light design of machine and hi-tech engineering. 5.New tension control mechanism assures proper knife tension. 6.Ball nozzle type airflow work table is standard equipment. 7.Casters make machines easily mova ble. 8.Inverter circuit has self-detector which shows display error message when overloaded.

Blue Streak II

MODEL 629X – With versatility unmatched by any other straight knife, the Blue Streak II® is the obvious choice when one cloth cutting machine is required to perform many tasks.

Brute Variable Speed®

MODEL 627VS – A standard Brute Straight Knife enhanced with a variable speed motor to offer increased acceleration, and smoother operation, all while saving energy. It is the only cutting machine on the market that runs at speeds up to 4,000 RPM’s.

Brute®

MODEL 627X – With a super-efficient and extra powerful motor, the 627X Brute straight knife is designed to cut the toughest fabrics or an increased number of ply.

Cloth Drill®

MODEL CD3 – The Eastman Cloth Drill marker can drill holes through numerous layers of fabric, indicating buttonholes, darts, pockets, and other attachment points.

End Cutter EC 3 NL

Features CUTTING HEAD：MOTORIZEDCUTTING HEAD CUTTING：WHANDV/UHLOhjGHANDLE(ORSHORT) CUTTING LENGTH：MAX90'BYHAND MAX 90'PRESET LENGTH CONTROL MAX90'PRESETLENGTHCONTROL TRACK LIFTER：BY HAND

Hot Cloth Drill®

MODEL CD3H – The Hot Cloth drill leaves identifiable marks on loosely woven, or knit fabrics, where an ordinary drill mark would not be detected.

Plastic Master®

MODEL 629PM / 627PM – Eastman’s Plastic Master gravity fed, blade lubrication, and cooling system have been designed specifically to eliminate materials from fusing during the cutting of intricate patterns or straight lines. This is a perfect choice for cutting plastic and other fusible materials like cotton backed vinyl, PVC and other reinforced plastics.