FABRIC CUTTER FOR SAMPLE OR SMALL PRODUCTION

New features

The new mokel complies with European standard, major components are imported from Swiss.US, Japan etc.
Separate setting on creasing pressure toward X and Y direction according to texture of corrugated board.
It adopts swiss high speed vibrating cutting tool, available for any depth setting of the blade.
Special salty sensory device meets the European standard.
Directly control on all sharp turnings of machine which is user friendly.
Configured vacuum muffler in order to lower noise to provide a quite and comfort working environment.

winda-3winda-3winda-3

winda-3

Model WD-FCS 1410 WD-FCS 1813 WD-FCS 2516
Cutting Size 1400mm x 10000mm 1800mm x 1300mm 2500mm x 1600mm
Job Characteristics The cutting machine runs with the computer ,transfers data in high speed, can be used continuously.
Cutting speed 800mm/s-1150mm/s
Availble material PU PVC. Clothing Material, Genuine leather, PU Leather, PVC Leather, Sponge, Composite materials etc .
Motor Servo Moter
Cutting Tool 18000 Vibration Cutting Head 18000Rotate/Min
Available Thickness 0.1 – 15 mm
CuttingPrecision/Repeating Precision ±0.1 mm
Functions Marking, Creasing, Dotted line cutting. Drawing and cuting
Resolution 0.025mm/0.01mm/0.1mm(Optional)
Interfact Component Linear guide/synchronous pulley/imported timing belt
Command System HP-GL GP-GL HP-GL and GP-GL comnatible mode
ContrIling Panel Touch contronl LCD disply
> Air Pump Working Voltage 380V +10% 50Hz AC380V 10% 50Hz

SPREADING/CUTTING TABLE

It has the flexibility to match with other brand’s auto—spading machines requirement.

Special plastic laminate finished/hard board finished with special glue, guarantee strong and even long-lasting.
Together with the refined leg supports, our cutting tables are unbeatable by any other brand’s cutting tables.
Our cutting tables are designed for mass production. Provide strong and smooth movement especially good for auto-spreading machines and automatic computerized cutting system.

winda-3

AIR BLOWING TABLE

By using tops pre—drilled with flo/vac chamber pre—installed of the table’s surface. It floats the heaviest spreads and slippery fabrics for easier movement.

winda-3

winda-3

Special Features:

  • 3.5hp-7.5hp high-pressure motor, air circulation is a lot more than any other brands.
  • Easy to use; ever long-lasting. No special guarantee.
  • Provide one-year after-sell service.
  • By using the secret compartment VIPM, the air passage is smooth for circulation.

MANUAL END CUTTER

Easy install, Easy operate High speed motor for any fabric can be cut easily Even and exactly cutting edge to save material and time Automatic counting device .

winda-3

winda-3

AUTOMATIC END CUTTER

Easy Install. One key operate High speed motor for any fabric can be cut easily Cut length can be set Even and neatly cutting edge to save material and time Elevating time can be set Automatic counting and sharpening device.